NEO TOOLS 11-607, Быстрый старт

Страница: 4 / 16

4
neo-tools.com
OPERATION MANUAL
VIDEO BORESCOPE
GENERAL SAFETY INFORMATION
Thanks for choosing our Video Borescope. It is a worldwide patented
product with 3.5” color TFT LCD screen. Please read the operation manual
carefully before using this product.
Safety application conditions
• Keep usage area clean. (Cluttered or dark areas make accidents easily.)
• Do not operate the video borescope in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
• Do not use it in an area where it could contact electrical wiring or an
electrically charged object. Contact with a “live” wire or object will make
exposed metal parts of the tool “live” and can give electrical shock to
the operator.
• Do not use it near moving machinery.
• Do not use more than eighty degree of environment
• Keep children and bystanders away while operating it.
• Do not use this product during tired or drug using.
• Use personal protective equipment. Always wear eye protection.
• Do not overreach. Keep proper footing and balance at all times.
PRODUCT STRUCTURE DIAGRAM AND KEY DEFINITION
The front view
The
side
View
Key Definition
Short press for pause /
long press for Power
on/off
Short press for
brightness /Long press
with zoom in
Playback/Return back
MENU OK
Short press for MENU/
Long press for OK
Photo/Down Function
Video/Up function
ACCESSORIES INSTALL
BATTERY REMOVING
Notice
Can only use AA alkaline batteries. Please read the following
instructions before changing the battery.
1. the battery cover fastened to the side
and then upwards. As shown on the right.
2. Put the 4 AA batteries inside
according to the polar indication in the
battery box.As shown on the right.
EN
3. After load the batteries,and then install the battery cover.
INSTALL THE FOUR ACCESSORIES
Four accessories (mirror, hook,ring and
magnet) are attached in the same way to
the camera head. To connect the camera
head, slip the end of the accessory over
the flats of the camera head.As shown on
the right.
INSTALL/REMOVE THE TF CARD
1.
Open the protective rubber cover to access memory card slots
2.
Slide the memory card into the slot, the top of the Card should face
opposite to the LCD Screen. Press in the card carefully and securely. It should
click in place.
3. Close the protective rubber cover.
4. To remove the memory card, press the memory card in and release, It
will automatically popup.
Notice
Please from the bottom up when you pull the rubber
protective cover(As shown) or it will be broken easily.
When insert the TF card, the icon of „ ” will be displayed in the LCD
Screen.
USING AND OPERATING
MENU SETTING
Before menu setting, press „
MENU OK ”
like
right picture
Then press “
” to choose, long press
for „
MENU OK ”
to confirm OK, press
„
MENU OK
”
exit menu
Press „
MENU OK ”
to enter the secondary menu.
Press “ ” in the secondary menu to choose: size,quality, time
stampLong press „
MENU OK ”
to confirm, short press „
MENU OK ”
to exit.
Press twice „
MENU OK ”
to enter the first menu.
There are language setting,automatic shutdown,the video output
format, format, date, version in the first menu.
*Language setting
Choose “language” and press „
MENU OK ”
to
confirm press „
MENU OK ”
to exit.
*Auto power off
*Auto power off
Choose “auto power off”<1/3/5mins/off>long press „
MENU OK ”
to
confirm short press „
MENU OK ”
to exit.
*TV Mode
Choose<NTSC/PAL>, long pree „
MENU OK
”
to confirm, short press „
MENU OK ”
to exit.
*Format
Choose format setting, <Cancel/ok>, long
press „
MENU OK ”
to confirm, short press
„
MENU OK
”
to exit.