neno LEADX Ultra, Руководство по сборке и эксплуатации

Страница: 107 / 108

NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023 Seite | 107
7 Care and maintenance
To avoid downtime, we recommend preventive maintenance of your LEADX Ultra CNC milling
machine. It is best to keep it clean and well lubricated at all times. We recommend performing three
types of maintenance for these machines: preventive maintenance, usage-based maintenance, and
condition-based maintenance. While we can guide you with preventive maintenance, usage-based
and condition-based maintenance are at the discretion of the user.
7.1 Preventive maintenance
Daily care
1. If you have a water-cooled spindle: Check if the water is circulating. In the case of a water-
cooled spindle, we also recommend the purchase of a flow indicator to facilitate the control.
Weekly
2. Use an air compressor and a small brush to clean all areas where dust has accumulated.
Monthly
3. Clean rails and ball screws with a microfiber cloth impregnated with an alcohol-containing
detergent.
4. Lubricate the ball screws with a grease gun.
5. Lubricate HRG and MGN rails with a grease gun.
Quarterly
6. If you have a water-cooled spindle: Replace the water.
7. Check the limit switches and the tight fit of all screws.
Annual
8. Check for signs of "play" on the bearings and ball screw nuts.