9
Removing a Battery from the Hammer Drill
1.
Set the rotational direction switch to the middle position.
Caution:
To minimize the risk of accidental activation,
always ensure the rotational direction switch is in the
neutral (middle) position before performing any
maintenance work on the hammer drill, as well as
during transportation and storage.
2.
Rotate the locking ring counterclockwise. The locking ring
holds the battery pack in position and prevents it from
detaching.
3.
Pull the battery pack out and down, without exerting any
force.
Inserting a Tool in to the Hammer Drill
The hammer drill spindle is locked whenever the On/Off trigger is
not pressed. This ensures quick, convenient and easy changing of
the tool in the keyless chuck.
1.
Set the rotational direction switch to the middle position.
Caution:
To minimize the risk of accidental activation,
always ensure the rotational direction switch is in the
neutral (middle) position before performing any
maintenance work on the hammer drill, as well as
during transportation and storage.
2.
Ensure that the On/Off trigger is not pressed.
3.
Turn the chuck sleeve counterclockwise until it is open wide
enough to fit the tool.
4.
Insert the tool in to the chuck, placing it as far as it will go.
5.
Firmly tighten the chuck sleeve by hand, clockwise, to tighten
the chuck.
6.
To remove the tool, loosen the chuck sleeve counterclockwise
until the tool is free.
Содержание HD-18-3Li-50
Страница 1: ......
Страница 24: ...Nemo Power Tools Ltd www nemopowertools com ...
