16
To work in hammer mode, turn the mode selection ring
until the hammer symbol on the mode selection ring is
aligned with the single dot on the middle ring.
Important:
Only use the hammer drill in hammer mode
when the torque is set to the maximum, and the
hammer symbol on the mode selection ring is aligned
with the single dot on the middle ring.
Selecting the Torque
1.
Set the rotational direction switch to the middle position.
Caution:
To minimize the risk of accidental activation,
always ensure the rotational direction switch is in the
neutral (middle) position before performing any
maintenance work on the hammer drill, as well as
during transportation and storage.
2.
Hold down the silver notch on the torque setting ring, then
turn the torque setting ring until the desired torque setting is
aligned with the triangle on the drill body. All three rings will
rotate together as you turn the torque setting ring. If you
select the maximum torque (three dots), the silver notch pops
out and locks.
Содержание HD-18-3Li-50
Страница 1: ......
Страница 24: ...Nemo Power Tools Ltd www nemopowertools com ...
