Nemo HD-18-3Li-50 Скачать руководство пользователя страница 22

Страница: 22 / 24

Troubleshooting

Problem:

The battery is not charging, and there is a blinking red

light on the battery charger.

Possible Cause

Corrective Action

The battery is not

correctly inserted into the

charger.

Remove the battery from the

charger, then re-insert it correctly.

The battery contacts are

contaminated.

Clean the battery contacts, for

example by removing and inserting

the battery several times, or replace

the battery.

The battery is defective.

Replace the battery.

Problem:

The battery charger indicator does not light up.

Possible Cause

Corrective Action

The mains plug of the

battery charger is not

correctly plugged into the

socket.

Insert the mains plug fully into the

socket outlet, and ensure that the

socket is functional.

The socket outlet, mains

cable, or battery charger

are defective.

Check the voltage power; have the

battery charger checked by an

authorized after-service agent.

Caution:

Under no circumstances should the hammer

drill or accessories be opened for repairs or any other

purpose by anyone other than an after-sales service

technician authorized by Nemo Power Tools. Opening

the hammer drill invalidates the manufacturer

warranty.

Содержание HD-18-3Li-50

























Результаты поиска

Содержание HD-18-3Li-50

Отзывы:

Похожие инструкции для HD-18-3Li-50

Бренды по названию

Популярные бренды

Nemo HD-18-3Li-50, Руководство пользователя

Результаты поиска

Содержание HD-18-3Li-50

Отзывы:

Похожие инструкции для HD-18-3Li-50

Бренды по названию

Популярные бренды