8
The battery begins charging as soon as it is connected to the
charger.
A steady red light on the battery charger indicates that
the battery is charging.
A steady green light on the battery charger indicates that
the battery is fully charged.
Note:
The battery is equipped with an NTC
temperature controller that only allows it to be
charged when its temperature is between
0˚C
-
45˚C
(32˚ F
-
113˚ F), ensuring a long battery service life.
3.
When you are ready to use the battery, rotate the CHOGORI
connector’s plastic cap counterclockwise and pull it vertically
out of the charger.
Inserting a Battery in to the Hammer Drill
1.
Set the rotational direction switch to the middle position.
Caution:
To minimize the risk of accidental activation,
always ensure the rotational direction switch is in the
neutral (middle) position before performing any
maintenance work on the hammer drill, as well as
during transportation and storage.
2.
Insert the battery into the bottom of the hammer drill base.
Caution:
Use only a Li-ion battery from the original
factory with the voltage listed on the nameplate of
your hammer drill. Using other batteries not suitable
for the hammer drill can lead to malfunctions, cause
damage to the power tool, and pose a fire hazard.
3.
Push the battery up until it is pushed to the limit, then rotate
the locking ring until it is securely locked. The locking ring holds
the battery pack in position and prevents it from detaching.
Содержание HD-18-3Li-50
Страница 1: ......
Страница 24: ...Nemo Power Tools Ltd www nemopowertools com ...
