Nemo AG-22-5Li-50 Скачать руководство пользователя страница 6

Страница: 6 / 29

♦

Only use fiberglass-reinforced depressed center grinding

wheels.

♦

Do not use damaged wheels. Check the wheels for damage and

flaws by running the tool with the wheel guard and no load for

about a minute. In addition, check the wheel for vibration and

wobbling, which indicate a loose or unbalanced wheel.

♦

Only use the flanges specified for this angle grinder.

♦

Do not damage the spindle, the flange, or the lock nut, as

damage to these parts could result in wheel breakage.

♦

Hold the angle grinder by its insulated surfaces when it might

contact live wires during operation. Contact with live wires will

make the exposed metal parts of the angle grinder live, which

can lead to electrocution.

♦

Keep your hands away from the rotating parts of the angle

grinder.

♦

Only operate the angle grinder when you are holding it

securely. Never leave the angle grinder running.

♦

Ensure the wheel does not touch the workpiece before the

angle grinder is switched on.

♦

Always hold the angle grinder so that sparks fly away from you,

other people, and flammable materials.

♦

Do not force the angle grinder or apply excessive pressure. The

weight of the angle grinder should provide adequate pressure.

When required, adjust the pressure on the angle grinder so

that it does not slow down during operation.

♦

Do not bang the wheel or disc on to the workpiece.

♦

Do not bounce or snag the wheel, particularly around corners

or edges, as this may cause loss of control and kickback.

♦

Always refit the wheel or disc if you drop the angle grinder.

♦

Do not touch the workpiece immediately after operation as it

might be extremely hot.

Содержание AG-22-5Li-50






























Результаты поиска

Содержание AG-22-5Li-50

Отзывы:

Бренды по названию

Популярные бренды

Nemo AG-22-5Li-50, Руководство пользователя

Результаты поиска

Содержание AG-22-5Li-50

Отзывы:

Бренды по названию

Популярные бренды