Nemo AG-22-5Li-50, Руководство пользователя

Страница: 23 / 29

22
Best Practices for Underwater Operation
Your Nemo Submersible Angle Grinder is designed to be
waterproof, so that it can be used both on land and underwater. To
obtain the maximum serviceable life of your angle grinder, adhere
to the following best practices when using the angle grinder
underwater:
♦ You must pressurize the angle grinder before you can use it
underwater, as described in Pressurizing the Angle Grinder for
Underwater Use , page 21.
♦ Do not exceed the maximum operational depth as
recommended by the manufacturer.
♦ The angle grinder is hi-tech piece of equipment and should be
treated with care. Its watertight seals may be damaged if it is
dropped.
♦ When moving about or working underwater, the angle grinder
should be secured to you by a tool leash at all times.
♦
The angle grinder may be used in salt water.
Note: After using the angle grinder in salt water,
immediately rinse it in fresh water to remove all salt
residue.
♦ Before storing the angle grinder in the carrying case after use in
water, flush it with fresh water and dry it off.
♦ Treat the high quality battery with care. Keep the battery fully
charged and dry, ready for use, and always store it in the
carrying case when not in use.
♦
To extend the operating time of the battery when working
underwater, ensure the speed selector switch is in the Off (0)
position when the angle grinder is not actively cutting,
particularly when there will be a long time between cuts. When
the speed selector switch is in this position, the battery does
not supply any power to the motor, conserving battery power.