Nemo AG-22-5Li-50 Скачать руководство пользователя страница 4

Страница: 4 / 29

Safety Warnings

Warning:

Read all safety warnings and instructions, and

save them for future reference. Failure to adhere to

these warnings can result in serious injury and damage

to equipment.

Work Area Safety

♦

All work should be done in accordance with the local, state,

and government occupational safety and health guidelines.

♦

Keep your work area clean and well lit.

♦

Do not operate power tools in explosive atmospheres, such as

in the presence of flammable liquids, gases, or dust.

♦

Keep bystanders and children away when operating power

tools.

Personal Safety

♦

Stay alert and use common sense when operating power tools.

♦

Do not use power tools when you are tired or under the

influence of drugs, alcohol, or medication.

♦

Use personal protective equipment. It is recommended to

always wear eye protection, as well as a P2 filter-class

respirator.

♦

Dust from materials such as lead-containing coating, some

wood types, minerals, and metal can be harmful to one’s

health. Observe the relevant regulations in your country for the

materials to be worked.

General Power Tool Safety

♦

Store idle power tools out of reach of children, and do not

allow persons unfamiliar with the power tool or these

instructions to operate the power tool.

Содержание AG-22-5Li-50






























Результаты поиска

Содержание AG-22-5Li-50

Отзывы:

Бренды по названию

Популярные бренды

Nemo AG-22-5Li-50, Руководство пользователя

Результаты поиска

Содержание AG-22-5Li-50

Отзывы:

Бренды по названию

Популярные бренды