Nemo AG-22-5Li-50, Руководство пользователя

Страница: 20 / 29

19
3. Fit the inner flange (3) on to the spindle, on top of the wheel
guard.
4. Position the wheel (2) on top of the flange.
5. Press the shaft lock firmly to prevent the spindle from turning,
then use the lock nut wrench to screw a lock nut (1) on to the
spindle to secure the disc in place.
6. To remove the wheel, press the shaft lock firmly to prevent the
spindle from turning, then use the lock nut wrench to remove
the lock nut from the spindle, freeing the wheel and guard.
Mounting a Wire Cup Brush
For International versions of the Nemo Submersible Angle Grinder,
use a brush suitable for an M14 (14mm) spindle. For U.S. versions,
use a brush suitable for a 5/8 in 11 UNC spindle.
1.
Ensure the speed selector switch is in the Off position (0).
Caution: To minimize the risk of accidental activation,
ensure the speed selector switch is in the Off ( 0 )
position before performing any maintenance on the
angle grinder, as well as during transport and storage.
2. Remove all accessories from the spindle.
3. Press the shaft lock firmly to prevent the spindle from turning,
then thread the wire cup brush (1) on to the spindle and use
the lock nut wrench to secure it in place.