Nellcor OxiMax N 5500 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 101

Nellcor OxiMax N 5500 Скачать руководство пользователя страница 78

Section 8: Packing For Shipment

8.1 General Instructions
8.2 Returning the N5500
8.3 Repacking In Original Carton
8.4 Repacking In a Different Carton

N5500 Service Manual 71

Disassembly Guide/

Spare Parts, N5500

8.1 General Instructions

To ship the monitor for any reason, follow the instructions in this section.

Pack the monitor carefully. Failure to follow the instructions in this section may result
in loss or damage not covered by the Nellcor warranty. If the original shipping carton is
not available, use another suitable carton; North American customers may call Nellcor
Technical Services to obtain a shipping carton.
Prior to shipping the monitor, contact your supplier or the local Nellcor  office
(Technical Services Department) for a returned goods authorization  (RGA) number.
Mark the shipping carton and any shipping documents with the  returned goods
authorization number.

Pack to shipping the monitor, contact your supplier or local Nellcor office (Technical
Services Department) for a returned goods authorization number. Mark the shipping
carton and any shipping documents with the returned goods authorization (RGA)
number. Return the N5500 by any method that provides proof of delivery.

8.2 Returning the N5500

Contact Nellcor Technical Services Department or your local Nellcor representative for
shipping instructions, including a Returned Goods Authorization (RGA) number.
Unless otherwise instructed by Nellcor Technical Services Department, it is not
necessary to return  the sensor or other accessory items with the monitor. Pack the
N5500 in its  original shipping carton. If the original carton is not available, use a
suitable  carton with appropriate packing material to protect it during shipping.

8.3 Repacking In Original Carton

If available, use the original carton and packing materials. Pack the monitor as follows:

1. Place the monitor and, if necessary, accessory items in original packaging.

2. Place in shipping carton and seal carton with packaging tape.

3. Label carton with shipping address, return address and RGA number, if applicable.

«
...
76
77
78
79
80
...
»

Содержание OxiMax N 5500






































































































Отзывы:

Нет отзывов