Nellcor OxiMax N 5500, Руководство по обслуживанию, Страница: 41 / 101

Service Menu and Factory Default Settings
34 N5500 Service Manual
D
ef
au
lt
S
et
ti
n
g
s
an
d
T
ro
u
b
le
sh
o
o
ti
n
g
4.3 Demo Mode
The purpose of Demo mode is to show a visual presentation demonstrating how the
N5500 monitor works. The following
pr
ocedure is set to Demo mode.
1.Turn the N5500 monitor on.
2.Rotate the knob to highlight the Set-up icon, then press the knob. Set-up menu
displays.
3.Rotate the knob to highlight Service Menu in the Set-up menu (see Figure 5), and
then press the knob to enter the Demo access code for Demo mode.
4.Three digits displays in the Level 2 Menu as shown in Figure 5.
5.Rotate the knob to highlight the top of the digits. Press the knob to enter the Demo
access code, “ 3 ” “ 1 ” “ 4 ” in this order.
6.The monitor is now set to Demo mode, and demonstrates a typical monitoring screen.
4.4 Factory Default Settings
Factory default settings are divided into three groups, adult, pediatric and neonatal as
described in Table 12.
The parameters of the N5500 monitor are preset to “Adult” monitoring mode. Alarm
limits settings will be automatically changed to the default settings for each patient
mode as the mode is changed to Adult, Pediatric or Neonatal mode.
Table 12. Factory Default Settings for the N5500
Factory Defaults
Parameter
Adult Pediatric Neonatal
Monitoring Mode Adult Pediatric Neonatal
NIBP Initial Cuff Inflation 180 mmHg 180 mmHg 120 mmHg
NIBP Auto Mode Interval OFF OFF OFF
NIBP SYS Alarm Upper Limits 160 mmHg 120 mmHg 90 mmHg
NIBP SYS Alarm Lower Limits 90 mmHg 70 mmHg 40 mmHg
NIBP DIA Alarm Upper Limits 90 mmHg 70 mmHg 60 mmHg
NIBP DIA Alarm Lower Limits 50 mmHg 40 mmHg 20 mmHg
NIBP MAP Alarm Upper Limits 110 mmHg 90 mmHg 70 mmHg
NIBP MAP Alarm Lower Limits 60 mmHg 50 mmHg 30 mmHg
ECG Size 10.0 mm/mV 10.0 mm/mV 10.0 mm/mV
ECG Filter Mode Monitor Monitor Monitor
ECG Pacer Detect OFF OFF OFF
ECG Sweep Speed 25.0 mm/s 25.0 mm/s 25.0 mm/s