18 Nektar Impact LX49+ & LX61+ User Guide www.nektartech.com
Unlike the Control Assign functions, Global functions can be accessed regardless of what preset has been selected. And just to recap:
Pressing [Shift]+[Patch>] (Setup) buttons will activate the Setup menu and the display will show {S.E.t.} with the 3 dots blinking for as long
as the menu is active. The following assumes the Setup menu is active.
Global MIDI Channel (C2)
The Impact LX+ keyboard always transmit on the Global MIDI Channel but this setting also affect any control or pad that is not assigned
to a specific MIDI channel (i.e. 1-16). Earlier we learned how the Octave and Transpose buttons can be set up to change the Global MIDI
Channel but here is another option:
•
Press the C2 key on your keyboard to select Global MIDI Channel. The display show the current value {001-016}
•
Change the value in decrements/increments using the keys with the -/+ symbols screened above (C3/C#3). The value assignment is
instant so if you exit the Setup menu after making changes, those changes remain active
•
You can also enter a specific value (1-16) using the white number keys spanning G3 –B4. Press Enter (C5) to accept the change
Keyboard Velocity Curves (C#2)
There are 4 different keyboard velocity curves and 3 fixed velocity levels to choose between, depending on how sensitive and dynamic you
want the Impact LX+ keyboard to play.
Name
Description
Display abbreviation
Normal
Focus on mid to high velocity levels
uC1
Soft
The most dynamic curve with a focus on the low to
mid velocity levels
uC2
Hard
Focus on the higher velocity levels. If you don‘t like
exercising your finger muscles, this may be the one
for you
uC3
Linear
Approximates a linear experience from low to high
uC4
127 Fixed
Fixed velocity level at 127
uF1
100 Fixed
Fixed velocity level at 100
uF2
64 Fixed
Fixed velocity level at 64
uF3
Here is how you change a velocity curve:
•
Press the C#2 key on your keyboard to select Velocity Curve. The display show the current selection
•
Change the value in decrements/increments using the keys with the -/+ symbols screened above (C3/C#3). The value assignment is
instant so if you exit the Setup menu after making changes, those changes remain active
•
You can also enter a specific selection (1-7) using the white number keys spanning A3–G4. Press Enter (C5) to accept
Global Functions and Options
