Neilsen CT4542, Оригинальное руководство пользователя

Страница: 9 / 16

SETUP & PREPARATION
1. CHANGING MODULES
CAUTION: ENSURE THE TOOL IS DISCONNECTEDFROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
It is recommended that the Multi Function Sharpener be bolted to a secure bench prior to
operating.
Removing a Module
1 Press and hold down the
module locking clip.
2 Slide the module
upwards to remove.
Installing a Module
1 Align the module with the guide
rails on the front of the unit.
2 Slide the module
down over the
sharpening wheel
until it clicks into
place.
3 Ensure locking clip is
secure by trying to raise the
module.
Note: Approximately 3mm
movement is normal