Neilsen CT4542, Оригинальное руководство пользователя

Страница: 10 / 16

2. CHISEL AND BLADE SHARPENER
CAUTION: THE TOOL IS RECOMMENDED FOR THE USE WITH A RESIDUAL CURRENT
DEVICE WITH A RATED CURRENT OF 30mA OR LESS.
1 Install the chisel and blade
sharpener module.
3 Loosen the adjustable angle knob and
adjust the angle to match the existing
bevelled angle on the tool.
5 Slide the blade rest back and forth
across the sharpening wheel with light
steady pressure.
2 Position the chisel or blade on the blade
rest. The magnets will hold the blade
in position.
4 Turn on the sharpener by pressing
the on/off switch to
the on position “I”.
6 Gradually lower the blade down the
blade rest until the tool is sharpened.
Note: When sharpening narrow chisels or blades, place the narrow tool guide onto
the blade rest to act as a spacer and sharpen as above.