1. SPECIFICATION
Resolution : 0.01mm or 0.0005”
Maximum measuring speed: 1.5m/sec or 60”/sec
Measuring system: Linear capacitive measuring system
Display: LCD display
Battery : 1.5V DC LR44 button battery x 2
Operating temperature: 0
o
C ~ 40
o
C
Storage temperature: -20
o
C ~70
o
C
Influence of humidity: not important within 0 to 80% of relative humidity
2.
IMPORTANT SAFETY INFORMATION
1.Clean caliper bar with dry cotton fabrics before using in order to avoid mad
display of caliper caused by humidity.
2.Keep the caliper clean and dry (Liquid can damage the slider).
3.Faces should be cleaned gently with cotton fabrics. Never use petrol, acetone
and other organic solutions.
4.In order to save power, turn off the unit when caliper is going to stay idle for
some time.
5.Never apply any electric pressure on any part of the caliper and never use an
electric pen for the fear of damaging its chip.
6.For other notes please refer to the conventional calipers
7.Accidental wrong display may happen while replacing the battery. Just take out
the battery and then put it in again after more than 30 seconds until the display
returns to normal.
Содержание CT2378
Страница 2: ......