Neilsen CT2378, Инструкция по эксплуатации

Страница: 6 / 8

5. USING THE TOOL
● PREPARATIONS:
1.Slider can be removed only after the locking screw is loosened.
2.Wipe clean all the measuring faces and caliper bar. No organic solutions are allowed.
3.Check to see if all the buttons,switches,and LCD display respond well.
● BASIC MEASURING METHODS:
1.Loosen the locking screw.
2.Switch the unit on by pressing “ON/OFF” button, or move caliper slider for auto power on, then
select the unit by pressing “mm/inch” button. (Each time the button is pressed, inch and metric
digits will be displayed alternatively).
3.Apply normal measuring pressure on slider to close the external measuring jaws.Then press
“zero” button to reset the display to zero.
4.Press “ON/OFF” button for power on or the power will auto off when not in use for 5 minutes.
● APPLICATIONS:
1.Comparisons between plug and hole 2.Deviation from reference size A
3.Measuring of bottom thickness 4.Measuring of centre distance 5.Measuring where
between two identical holes display faces opposite