- 8 -
STEP 1: Install impeller onto the Gear Box
1.
Insert Screw M4x20 through impeller then through gear box axle
.
STEP 2: Install Wheel Assembly Frame on the Gear Box
1. Make sure the hole on axle of gear box is on the right side of the assembly as shown below. Attach
one end of frame brace to hopper frame assembly using bolts M6x35 and lock nuts M6.
2.
Insert two bolts M6x35 into the connecting cross rod through the wheel assembly frames and
frame braces. Insert bolts M6x60 through the wheel assembly frames onto hopper frame
assembly, put on lock nuts M6 and loosely tighten.
Assembly Instructions
Bolt M6x35
