- 13 -
ADJUSTING THE FLOW
1. Push the handle to the top position (upwards). Move the position of the wing nut on the gauge &
lever to adjust the three holes between hopper and adjustable plate when spreading material.
CONSISTENT COVERAGE
To insure consistent coverage, make sure each broadcast pattern slightly overlaps the previous broadcast
pattern as shown in figure below for large particles. The approximate broadcast widths for different size
materials are shown in
Chart B
.
WARNING
Do not over apply spreading material. Follow the recommended coverage rate for each product. Over
application will lead to damage and contamination. If spreading material accidentally hits or deposits
too heavily, soak the area thoroughly with a garden hose or sprinkler to prevent chemical burning.
Operation Instructions
