- 10 -
STEP 5: Installing Gauge and Handle
1. Upper handle has three positions for operator comfort before installing the gauge operator needs
to determine the best.
2. Insert bolt M6X50 through both upper handles, flat washer and loosely tighten the M6 lock nut.
3. Install gauge & lever using two M6X50 bolts. Be sure the gauge is on left hand side. Tighten the
lock nuts for gauge first, and then tighten the lock nut for the upper handles in step 2.
STEP 6: Installing the Hopper
1. Lower the hopper into the frame assembly, carefully line up the hole in the bottom of the hopper
with the frame.
2. Using four hex bolts M6 x 45 and four washers, fasten the hopper to the frame by passing the bolts
through the hopper and mounting tube. Secure with lock M6 nuts.
