- 15 -
WARNING
Improper maintenance and storage of the push spreader may void your warranty.
MAINTENANCE
•
After each use clean material out of hopper.
•
Rinse/dry inside and outside of the spreader after each use.
•
Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE 25 PSI.
•
Periodically check all fasteners for tightness.
•
Annually clean and lightly lubricate parts.
•
Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
•
Never exceed load capacity rating of 100lbs it will damage the spreader.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement
parts that do not meet specifications may result in a safety hazard or poor operations.
STORAGE
•
Never allow material to remain in the hopper for extended periods of time.
•
Before storing make sure the spreader is clean and dry for years of trouble free service.
•
Store indoors or protected area during severe weather and winter months.
Maintenance and Storage
