NEFF D96BMU5N0A, Инструкция по установке и эксплуатации

Страница: 9 / 20

Operating the appliance
en
9
Control panel model 2
Setting the fan
Switching on
■
Touch the
#
symbol.
The fan starts at setting
ƒ
.
■
Touch + or - to alter the fan speed.
Switching off
Touch the
#
symbol.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the
˜
symbol.
˜ƒ
will light up on the display.
Touch the
˜
symbol again to switch back to intensive
mode
˜‚
.
Note:
After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
If you want to end intensive mode before the preset
time expires, touch the
˜
symbol.
Automatic mode
Switching on
1.
Touch the
#
symbol.
The fan will start at setting
ƒ
.
2.
Touch the
‘
symbol.
The optimum fan setting is set using an automatic air
sensor.
Switching off
Touch the
‘
or
#
symbol to switch off automatic mode.
The fan will switch itself off automatically if the
automatic air sensor detects no further change in the air
quality in the room.
Automatic mode can run for a maximum of 4 hours.
Fan run-on time
Switching on
Touch the
A
symbol while the fan is running at fan
setting 1.
The fan will run at fan setting 1.
After approximately 10 minutes, the fan will switch itself
off automatically.
Switching off
Touch the
@
symbol to select a different fan setting.
This immediately stops fan run-on.
AirFresh function
Switching on
Touch the
3
symbol.
3
will be shown on the display panel.The fan runs for
approximately 5 minutes per hour at fan setting 1.
Switching off
Touch the
3
symbol.
This ends the AirFresh function.
Symbol Explanation
#
Fan on/off
Q
Noise reduction function
3
AirFresh function
A
Reduce fan setting/fan run-on
@
Increase fan settings/intensive mode 1, 2
˜
Intensive mode 2 shortcut
‘
Automatic air sensor
6
Light on/off/dimming
Indicator/
symbol
Explanation
Q
Noise reduction function
1-3 Fan settings
9
Fan run-on
3
AirFresh function