4
Installing the app
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your smartphone.
3. Create an account with your e-mail address and tap
Continue
.
4. Enter the received verification code.
5. Create a password and tap
Done
.
6. Tap
Add Home
to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with
and tap
Done
.
Connecting the app
1. Open the Nedis Smartlife app on your smartphone.
2. Tap
+
in the top right corner.
3. Tap the corresponding product group.
4. Plug
A
r
into a power outlet.
5. Press
A
1
to open
A
2
.
6. Fill
A
4
with water.
-
Never fill the product over the
MAX
or under the
MIN
. Otherwise
hot water can spill out of the product.
7. Place
A
4
on
A
8
.
8.
A
9
blinks to indicate the product is in pairing mode.
4
If
A
9
is not blinking, activate the pairing mode manually. Press
and hold
A
w
for 6 seconds.
9. Confirm in the app if
A
9
is blinking.
Heating up water
1. Place the product on a stable and flat surface.
2. Plug
A
r
into a power outlet.
3. Press
A
1
to open
A
2
.
4. Fill
A
4
with water.
-
Never fill the product over the
MAX
or under the
MIN
. Otherwise
hot water can spill out of the product.
-
Do not spill any water on the base.
5. Close
A
2
.
6. Place
A
4
on
A
8
.
7. Press
A
w
to switch on the product.
a. Again press
A
w
to heat up the water to 100°C.
b. Repeatedly press
A
q
to select the desired water temperature.
Confirm the selected temperature with
A
w
.
-
Do not remove or open the lid while the water is heating up and
when pouring out hot water.
4
The product automatically switches to standby mode.
-
Make sure the product is finished heating before removing it
from the base.
-
Be careful when opening the lid, hot steam may escape.
4
Press
A
w
to exit standby mode.
4
A
9
indicates the selected water temperature.
A
7
shows the
following colours for other temperatures.
Indicator LED
Water temperature
Green
75 °C
Blue
85 °C
Red
100°C (boiling)
Green and red combined
Keep warm at 60°C (for 2 hours)
Using the app
There are three ways to control the product with the app.
1. Direct control
a. Open the Nedis Smartlife app on your smartphone.
b. Tap the icon of the product to open the corresponding
interface.
c. Set the desired temperature and confirm.
2. Schedule or automation control
a. Open the Nedis Smartlife app on your smartphone.
b. Tap
Smart scenes
.
c. Tap
+
in the top right corner.
d. Tap
Tap to run
.
e. Tap
Run the device
.
f. Tap the icon of the product.
g. Set the desired temperature and confirm.
h. Rename the created scene and confirm.
Make a schedule or open the scene in the app to start heating up
the water.
3. Voice control (in combination with Google Assistant or Amazon
Alexa)
a. Open the Nedis Smartlife app on your smartphone.
b. Open the products settings menu.
c. Select the desired voice assistant.
d. Follow the instructions via Google Assistant or Amazon Alexa.
Cleaning
Before using the product for the first time, thoroughly clean all parts
that come in contact with food.
-
Allow the product to cool down before cleaning it.
-
Unplug the product before cleaning.
-
Do not immerse the product, the power cable or plug in water
or other liquids.
-
Do not attempt to repair the product. If the product does not
operate correctly, replace it with a new product.
-
Do not use aggressive chemical cleaning agents such as
ammonia, acid or acetone when cleaning the product.
Clean the product regularly with a soft, clean, dry cloth. Avoid
abrasives that can damage the surface.
-
Cleaning and user maintenance shall not be done by children
under the age of 8 and without supervision.
Descaling the product
4
Descale your kettle regularly.
1. Place the product on a stable and flat surface.
2. Press
A
1
to open
A
2
.
3. Fill
A
4
with 700 ml of white vinegar.
4. Fill
A
4
up to
A
5
with clean water.
5. Close
A
2
.
6. Place
A
4
back on
A
8
.
7. Allow the mixture to sit overnight.
-
Do not inhale the fumes of the mixture.
8. Empty
A
4
above a sink.
9. Press
A
1
to open
A
2
.
10. Fill
A
4
up to
A
5
with clean water.
11. Close
A
2
.
12. Boil the water following the steps in chapter 'Using the product'.
13. Repeat step 8- 12 until the odour of vinegar has been flushed
away.
14. The product is now descaled.
Declaration of Conformity
We, NEDIS, as manufacturer, declare that product WIFIWK10CGS
from the brand Nedis, produced in China was tested according to all
relevant CE standards / regulations and passed all tests.
The complete Declaration of Conformity ( + safety datasheet if
applicable ) can be found and downloaded via http://webshop.
nedis.com
For other compliant-related information, please contact customer
service desk for support:
via website: http://www.nedis.com
via e-mail: [email protected]
NEDIS B.V., De Tweeling 28,
5215 MC ’s-Hertogenbosch, THE NETHERLANDS
