nedis PEBL130CWT1, Быстрый старт

Страница: 4 / 28

4
a
Quick start guide
Single Electric Blanket
PEBL130CWT1
For more information see the extended manual online:
ned.is/pebl130cwt1
Intended use
The product is exclusively intended as electric underblanket for
indoor use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A )
1 Plug
2 Locking tab
3 Power socket
4 Temperature button
5 Time button
6 High button
7 Blanket
8 Temperature icon
9 Time icon
q Time indicator
w Temperature indicator
e Power switch
r Controller PS7G-H/L
Safety instructions
- WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this manual.
• Ensure before use you know how the product works and how to
operate it.
• Do not use the product if a part is damaged or defective. Replace
a damaged or defective device immediately.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Disconnect the product from the electrical outlet and other
equipment if problems occur.
• Do not drop the product and avoid bumping.
• Used only as underblanket.
• Always use the voltage (A.C. Only) marked on the rating label.
• Use only the type of controller marked on rating label.
• Always switch off the controller before you insert or remove a
plug.
• Do not expose the product to water or moisture.
• The product is not intended for medical use in hospitals.
• Do not use together with another heating appliance.
• When in use ensure the blanket and mains cord do not get
trapped.
• Children should be supervised to ensure that they do not play
with the product.
• Cleaning and user maintenance shall not be done by children
without supervision.
• The product must not be used by persons insensitive to heat and
other very vulnerable persons who are unable to react to
overheating.
• Children under the age of 3 should not use the product due to
their inability to react to overheating.
• The product is not to be used by young children over 3 years of
age, unless the controls have been pre-set by a parent or
guardian, or unless the child has been adequately instructed on
how to operate the controls safely.
• The product can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
• The cable and control unit of the product can rise the risks of
entanglement, strangulation, tripping or treading if not correctly
arranged. Make sure that excess ties and electric cables are
arranged in a safe way.
Connecting the controller (image B )
1. Lift the locking tab A 2 .
2. Push the plug A 1 into the power socket A 3 .
Removing the controller (image C )
- Make sure the power switch A e of the controller A r is
switched to Off.
1. Lift the locking tab A 2 .
2. Pull the plug A 1 out of the power socket A 3 .
- Do not pull the cord of the controller A r . And do not try to pull
the plug A 1 out without lifting the locking tab A 2 .
Preheat and use
- Do not use if it is damp or wet.
4
Preheat 30-60 minutes before using.
1. Connect the controller.
2. Connect the power cord to the mains.
- Ensure people do not trip over the cord.
3. Switch the power switch A e to On.
4. Press the High button A 6 to set at ‘H’.
4
After one hour the high temperature automatically will change to
‘L’ (Low temperature).
5. Press the Temperature button A 4 to set the temperature. Select
L,1-7,H.
6. Press the Time button A 5 to select the total operating time.
Select 1-9 hour.
- If you go to sleep or use it for a long time, set at 'L' or 1, to avoid
overheating.
After use
1. When the blanket is not in use, switch the power switch A e to
Off.
2. Remove the plug A 1 from the power socket A 3 .
3. Disconnect the power cord from the mains.
If you want to store the blanket for a longer period. Repeat step 1 – 3.
4. Let it cool down. Make sure the blanket is dry.
- Let it dry naturally. Do not iron or dry in the sun.
5. Gently fold the blanket and place back into the packing bag.
6. Store in a cool dry place.
4
Do not place items on top of it.
Specifications
Product
Single Electric Blanket
Article number PEBL130CWT1
Dimensions (l x w) 150 x 80 cm
Input voltage 220 - 240 V ~ 50 Hz
Wattage
60 Watt
Temperature settings range 25 °C - 50 °C ± 5 °C
Material Flannel fleece & polyester