UPASS ACCESS | INSTALLATION GUIDE
Installation
6/23
Mount the base-plate on the required location.
Ensure that it is placed correctly covering the cable entry hole. Properly fix the base-
plate into its position using the 2 screws. When mounting on a stone or concrete
wall drill 5mm holes for the plugs. When mounting on wood, drill with 2.5mm.
Install the uPASS Access reader onto the base-plate.
1
Feed the cable through the cable entry hole. Important note: minimum
bending radius 30mm.
2
Attach the top of the uPASS Access onto the base-plate.
3
Fix the assembly using the screw on the bottom.
Figure
2
: uPASS Access installation
1
2
3
