UPASS ACCESS | INSTALLATION GUIDE
Installation
5/23
2
INSTALLATION
2.1
SAFETY INSTRUCTION
The following safety precautions should be observed during normal use, service and
repair.
•
The uPASS Access may only be installed and serviced by qualified service
personnel.
•
Disconnect the power supply before (dis)connecting any wires, uPASS
Access is NOT hot-swappable, so when making or changing connections,
power must be switched OFF.
•
The cable shield shall be connected with safety ground and the metal case
of the external device(s).
•
To be sure of safety, do not modify or add anything to the uPASS Access
other than mentioned in this installation guide or indicated by NEDAP N.V.
2.2
MOUNTING INSTRUCTIONS
The uPASS Access can be mounted to any surface, including directly to metal. See
the picture below for details about the dimensions.
Figure
1
: uPASS Access dimensions (mm)
