iii
Important Information
WARNING
• Do not use any other object than the projector’s sliding lens cover to cover the lens while the projector is on.
Doing so can cause the object to get extremely hot, and possibly resulting in a fire or damage due to the heat
emitted from the light output.
• Do not place any objects, which are easily affected by heat, in front of the projector lens. Doing so could lead
to the object melting from the heat that is emitted from the light output.
Projector’s Tilt Angle Range
• Be sure to use the projector within a tilt angle range from 30° above horizontal to 30° below (including the maximum
tilt angle 10° created by extending the tilt foot).
Using the projector in any way other than the desktop and ceiling mount may result in failures of the projector. If
the projector is used over a tilt angle of 10° above horizontal or 10° below, the lamp life will decrease*.
* If using the projector within a range from ± (plus or minus) 10° to ± (plus or minus) 30° (shown by shaded area),
it is recommended to replace the lamp when the remaining lamp life reaches 25% . Even if the remaining lamp
life shows 25 % or more, the lamp may break or fail to illuminate depending on individual lamp characteristics
and usage conditions. To show the remaining life of the lamp, press the HELP button on the remote control
and select [INFO.]
→
[USAGE TIME] from the projector on-screen menu. (
→
page
)
Ceiling mount 0°
Up to +30°
Up to −30°
+10°
−10°
Desktop 0°
Up to +30°
Up to −30°
+10°
−10°
