195
8. User Supportware
• Operation on computer
1 Click Windows [Start]
→
[All Programs]
→
[NEC Projector User Supportware]
→
[Desktop Control Utility
1.0]
→
[Desktop Control], in that order.
The “Selection Of Network Connections” window is displayed.
This displays a list of the network devices connected to the computer you are using.
2 Select the network device to use and click [OK].
The “Startup password settings” window will be displayed.
• In case of Windows 7/Windows Vista, the User Account Control Window is displayed. Click [OK] or input the
administrator password.
Screen when Desktop Control Utility 1.0 is started first time
already
Screen if starting password has been set
IMPORTANT:
• Be sure to write down the starting password in case you forget it.
• The starting password must be input each time Desktop Control Utility 1.0 is started.
• Should you forget the starting password, reinstall the Desktop Control Utility 1.0.
A screen like the one below is displayed when the software is started on a PC installed with Windows XP Service Pack 2 (SP2) (or later).
Click “Unblock” if this is displayed.
