110
5. Using On-Screen Menu
[OPTIONS(2)]
Selecting Power-saving in [STANDBY MODE]
The projector has three standby modes: [NORMAL], [POWER-SAVING], and [NORMAL2].
The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which
consumes less power than the NORMAL mode.
NORMAL ���������������� Power indicator: Orange light/STATUS indicator: Green light
- MIC sound will not be output from speaker during this mode�
POWER-SAVING ���� Power indicator: Red light/STATUS indicator: Off
The following connectors, buttons or functions will not work during this mode�
- MONITOR OUT (COMP�) connector, AUDIO OUT connector, and MIC input jack
- LAN and Mail Alert functions
- Buttons other than POWER button on the cabinet
- Buttons other than POWER ON button on the remote control
- Virtual Remote Tool, USB Display fucntion
NORMAL2 (not supported by PE501X)
������������������������������ When in the standby mode, the POWER indicator will light orange and the STATUS indicator will not light�
This shows that the projector’s power can be turned on by wired LAN�
When in the standby mode, the following connectors, buttons or functions will not work:
- MONITOR OUT (COMP�) connector, AUDIO OUT connector, and MIC input jack
- Wireless LAN Unit
- [AUTO POWER ON(COMP�)]
- Buttons other than POWER button on the cabinet
- Buttons other than POWER ON button on the remote control
- PC control commands for other than power-on, USB Display function
In the state of [NORMAL2] as [STANDBY MODE], the following contents are restricted for controlling this
projector in standby mode by an externally installed device�
- POWER ON functions exclusively among the PC control command�
- HTTP server, AMX, and PJLink do not function�
- Cannot access to a Wireless LAN�
- Cannot access to the Image Express Utility Lite, Image Express Utility 2�0, and Network projector�
- Projector name is not shown on the indication display for selecting connection destination of Virtual
Remote Tool and PC Control Utility Pro 4/5�
