9
Attaching the mattress retainer bracket
Remove the pin from both ends of the retainer bracket.
Align both ends of the retainer bracket with the holes located at
the foot of the bed, and then insert them into the holes.
From under the bed, re-attach the pins to both ends of the
retainer bracket to keep them in place.
1
2
3
If a headboard is to be installed, see “Assembling the
headboard bracket.”
If the adjustable bed is set up without a headboard, place
your mattress on the adjustable bed surface. Your adjustable
bed installation is now complete.
IMPORTANT!
Make sure power
cords do not obstruct
any adjustable bed
mechanisms.
4
Lift the bed frame and turn it over carefully so the top side is
now facing upward.
NOTE:
Do not rest the frame on its side so the weight may not
damage the legs.
Plug the power cord into a grounded electrical outlet.
NOTE:
For optimal safety, using a surge protector (not included)
is highly recommended.
Install batteries in the remote control. Try all functions on the
remote to make sure all features are operational.
Return bed to flat position before continuing with the installation.
NOTE:
Make sure your bed is in a flat position before using
it. Press the FLAT button on the remote control for over 1.5
seconds after plugging in the power cord.
5
6
Installing the bed leg strap (optional)
Wrap the bed legs (front & back) together tightly using the bed
leg straps.
Fasten the straps to prevent movement & maintain stability.
1
2
To help prevent base separation when using two adjustable beds
together, use the bed leg straps.
Installation Guide
3
