15
Special Functions
Activating the emergency power down feature
Locate and remove the cover on the 9V battery compartment in
the power supply unit.
Install two (2) alkaline 9V batteries (not included with the
adjustable bed). Replace the battery cover.
When the 9V batteries are installed and a power failure occurs,
press the
FLAT
button on the remote control for the bed to return
to a flat position.
NOTE:
The 9V batteries are for single use only. After lowering the
adjustable bed once during a power failure, replace with a new
set of batteries.
1
2
3
Your adjustable bed supports the emergency power down feature when a power failure occurs while the head and/or
foot sections are raised.
Connecting your bed to a smart device
Your adjustable bed is equipped with the Bluetooth technology that enables your iOS or Android smart device to
interact with your bed through the Nectar Move mobile application.
If you are connecting your bed to the mobile app for the first time,
enable the mobile device pairing mode on your control box.
•
Unplug the power cord from the outlet and then plug it back
in. The LED light on the control box turns blue. After 20
seconds or after being operated by a paired remote control,
the LED light turns green and the control box enters mobile
device pairing mode.
•
On the control box, press the
PAIR
button twice. The LED
light on the control box turns blue. After 20 seconds, the LED
light turns green and the control box enters mobile device
pairing mode.
NOTE:
The control box stays in mobile device pairing mode for
60 seconds and the name of the of your bed is now visible on the
app.
From your mobile device, launch the app, and then tap the gear
icon to go to the Settings screen.
From the Devices list, select the name of your adjustable bed. The
name of your bed is on the sticker on the front cover of the Owner's
Manual and on the bed's control box.
1
2
3
Sample sticker showing the name
of your adjustable bed.
Before connecting your base to the mobile app, do the following:
•
Make sure your adjustable bed is plugged into a working electrical
outlet and the control box is on.
•
Download and install the Nectar Move mobile app from the App
Store
®
or the Google Play
TM
Store.
•
For iOS users, turn on your device's Bluetooth
®
. For Android users,
turn on your device's Bluetooth
®
and Location settings.
NOTES:
•
If your bed is not on the Devices list,
make sure your bed is in mobile device
pairing mode. For information, see step 1.
•
You can only connect one smart device
to one adjustable bed at a time.
•
For more information on using the mobile
app to control your adjustable bed, see
the Nectar Move App Guide.
NOTE:
Install the 9V batteries in the power supply unit only during a
power failure when the emergency power down function is needed.
