14
Remote Control Guide
Synchronizing two beds for tandem operation
To operate two adjustable beds simultaneously, you must connect both beds using the sync cable.
Plug both Bed A and Bed B to working electrical outlets. A surge
protector is recommended.
Press the FLAT button on Remote A and Remote B to align the
beds properly in a flat position.
Plug one end of the sync cable to the control box on Bed A. Insert
it into the port labeled "SYNC."
Plug the other end of the sync cable to the control box on Bed B.
Insert it into the port labeled "SYNC"
Bed A and Bed B can now be controlled simultaneously using
Remote A or Remote B.
NOTE:
When operating beds in tandem, both beds should always
be plugged into working electrical outlets.
1
2
3
4
Resetting your system
Resetting the system is sometimes necessary to restore any customization on the preset buttons to its factory settings.
On the remote control, press and hold the Lounge
and ZG
buttons at the same time until the remote backlight flashes.
All customized settings on the remote control and control box are
now cleared or returned to their factory default settings.
The convenient USB ports located on each side of your adjustable
bed provide easy access for charging your tech devices.
Using the mounted USB ports
Special Functions
