Necta Brio 250, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 44

2
© by NECTA VENDING SOLUTIONS SpA 0301 162-00
TRANSPORT AND STORAGE
To prevent any damage, special care should be taken
when loading or unloading the vending machine.
The machine can be lifted by a motor-driven or manual fork
lift truck, and the blades are to be placed underneath the
machine from the side which is clearly indicated by the
symbol on the packing.
Do not:
- overturn the vending machine;
- drag the vending machine with ropes or similar;
- lift the vending machine by its sides;
- lift the vending machine with slings or ropes;
- shake or jolt the vending machine and its packing.
The machine should be stored in a dry room where the
temperature remains between 0° C and 40° C.
It is important not to stack machines on top of each other
and always maintain the vertical position as indicated by
the arrows on the packing.
USING THE VENDING MACHINES OF HOT
DRINKS IN OPEN CONTAINERS
(e.g.: plastic cups, ceramic cups, jugs)
The vending machines of drinks in open containers should
be used only to sell and dispense drinks obtained by:
- brewing products like coffee and tea;
- reconstituting instant and lyophilized products;
These products should be declared by the manufacturer
as "suitable for automatic vending" in open containers.
The dispensed products should be consumed imme-
diately. Under no circumstances should they be pre-
served and/or packed for later consumption.
Any other use is unsuitable and thus potentially dangerous.
INTRODUCTION
This technical documentation is part and parcel of the
vending machine and must always follow the machine
in case it is moved or ownership is transferred, so as
to permit consultation by different operators.
Before installing and using the machine, it is first necessary
to carefully read and understand the instructions contained
in this manual, as they offer important hints on safe
installation, use and maintenance.
IDENTIFICATION OF THE VENDING
MACHINE AND ITS CHARACTERISTICS
Every machine is identified by its own serial number,
indicated on the data plate attached inside the cabinet on
the right-hand side.
This plate (see Figure) is the only one acknowledged by the
manufacturer and indicates all of the data which readily
and safely gives technical information supplied by the
manufacturer. It also assists in spare parts management.
IN CASE OF FAILURE
In most cases, any technical problems are corrected by
small repair operations; however, before contacting the
manufacturer we recommend that this manual be read
carefully.
Should there be serious failures or malfunctions, then
contact the following:
NECTA VENDING SOLUTIONS SpA
Via Roma 24
24030 Valbrembo
Italy - Tel. +39 - 035606111
Water mains characteristics
Absorbed power
Operating voltage
Model
Product code
Boiler data
Current
Frequency
Serial number
Type
Fig. 1