Necta Astro, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 84

5
© by NECTA VENDING SOLUTIONS SpA 0210 206-00
VARIABLE COMBINATION LOCK
Some machine models are fitted with a variable combina-
tion lock.
The lock is supplied with two silver colour keys to be used
for normal opening and closing.
The lock can be customised by using a kit, available as
accessory, which permits changing of the lock combina-
tion.
This kit includes a change key (black) for the current lock
combination as well as change (gold) and use (silver) keys
for the new combination.
Sets of change and use keys with other combinations can
be supplied on request.
Additional sets of use keys (silver) may be requested,
indicating the combination stamped on the keys.
Generally, only the use key (silver) is used, while the
combination change keys (gold) can be kept as spares.
Do not use the change key for normal opening, as it may
damage the lock.
To change combination do as follows:
- insert the current change key (black) and rotate to the
change position (reference notch at 120°);
- remove the current change key and insert the change key
(gold) with the new combination;
- rotate to the close position (0°) and remove the change
key.
The lock will now have the new combination.
Keys with the old combination cannot be used for the
new combination.
ACCESSORIES
A wide range of accessories can be installed on the
machine to change its performance:
The various kits are supplied with their own installation
instructions, which must be strictly observed to ensure the
machine's safety.
Installation and the following testing operations, must
be carried out only by qualified personnel who have the
specific knowledge of the machine functioning from a
point of view of both electrical safety and health regu-
lations.
Fig. 3