Necta Astro Скачать руководство пользователя страница 20

Страница: 20 / 84

0210 206-00

STATISTICS

Data on the machine operations is stored in both total
counters and relative counters, which can be reset without
losing total data.

PRINT

Connect an RS232 serial printer having a Baud rate of 9600,
8 data bit, no parity, 1 stop bit to the serial port located on
the push button board to print all of the statistics, and
namely:

Total

1 - counter by single selection;

2 - counter by time bands;

3 - discount counter;

4 - failure counter;

5 - coin mechanism data.

Relative

1 - counter by single selection;

2 - counter by time bands;

3 - discount counter;

4 - failure counter;

5 - coin mechanism data.

The printout will also contain the machine code, the date
and the software version.
To connect the printer, do as follows:

- press the confirm print button “ ” , displaying the message

“Confirm?”;

- connect the printer before confirming;

- press the confirm button “ ” again to start printing.

DISPLAY

When pressing the confirm button “ ” the data described in
the paragraph “Printing the statistics” is sequentially dis-
played.

DELETE STATISTICS

Statistics can be reset for relative counters globally (all
types of data) or selectively for:

- selections

- failures

- coin mechanism data

Press the confirm button “ ” , and the message “Confirm?”
starts blinking.
Press the confirm button “ ” , the message “Working” is
displayed for a few seconds and all statistics are reset.

SELECTION PRICES

This function is used to change the sales price for each
selection and for each time band (if programmed).

CHANGE TUBE CONTROL

By accessing the “Tube control” function the change tubes
can be filled or released manually.
Confirm refilling, and the display will indicate
“Credit: ——” which is the value of money available in
change the tubes; insert the desired coin into the selector
and the display will indicate the value of money available in
the change tubes.
When confirming releasing, it will be possible to decide
which tube to release. Each time the confirm button “ ”, is
pressed, a coin is ejected from the active tube.

DISPLAYING THE TEMPERATURE

With this function, it is possible to read, directly in °C, the
temperature of the coffee boiler and instant boiler.

TEST DISPENSING

For complete or partial dispensing tests each button (or
combination of buttons according to the models) is con-
trols its (see the dose selection table).

N.B. For espresso coffee based selections, only the
additions are dispensed with the partial dispensing of
powder and water; if a selection requires no addition
the message “Sel. disabled”, indicating a disabled
selection, will be displayed.

GSM PRE-ALARMS

The control software can sent a “running-out” signal via
GSM modem when a programmed number of pieces or
grams of powder for a certain product have been used up.
With this function the counters that control the pre-alarms
are reset.