Necta Astro, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 84

3
© by NECTA VENDING SOLUTIONS SpA 0210 206-00
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installation.
It must be installed in a dry room where the temperature is
between 2°C and 32°C, and not where water jets are used
for cleaning (e.g. in large kitchens, etc.).
The machine should be placed close to a wall, so that the
back panel is at a minimum distance of 4 cm from it and
correct ventilation may be ensured.
The machine must never be covered with cloth or the like.
The machine should be positioned with a maximum inclina-
tion of 2°.
If necessary provide proper levelling by way of the adjust-
able feet included (see Figure 12).
WARNING FOR INSTALLATION
The machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use of the
machine according to the standards in force.
The machine is sold without payment system, therefore the
installer of such a system has sole responsibility for any
damage to the machine or to things and persons caused by
faulty installation
.
The integrity of the vending machine and its conformity
with the rules and regulations in force for its relevant
systems must be checked by qualified personnel at
least once a year.
All packing materials shall be disposed of in a manner which
is safe for the environment.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- switch the machine off during periods of inactivity, thus
achieving considerable energy savings.
WARNING FOR SCRAPPING
Whenever the machine is to be scrapped, the laws in force
regarding environment protection should be strictly ob-
served. More specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials should be recovered by qualified
companies.
TECHNICAL SPECIFICATIONS
Height 1830 mm
Width 650 mm
Depth 760 mm
Overall depth with door open 1320 mm
Weight Kg
Fig. 2
Power supply voltage 230 V
~
Frequency 50 Hz
Installed power 2400 W
CUP DISPENSER
Suitable for cups with a rim diameter of 70-71 mm. with a
capacity of approximately 900 cups;
PAYMENT SYSTEM
The machine is supplied with all electrical prearrangement
for systems with Executive, BDV and MDB protocol, as
well as for installation of 24 V validators.
Beside the coin mechanism housing, suitable space is
provided for the installation (optional) of the most widely
used payment systems.