Necta Astro, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 84

7
© by NECTA VENDING SOLUTIONS SpA 0210 206-00
LOADING COFFEE
Lift the cover and fill the hopper with coffee, ensuring that
the shutter is fully open (see Fig. 6).
LOADING CUPS
When loading cups for the first time (i.e. with the cup
dispenser completely empty) do as follows:
- disconnect the electricity from the machine;
- rotate the shelf outwards, forcing the resistance of the
securing magnet;
- remove the cover of the cup container;
- fill the columns with cups, except the one aligned with the
dispensing opening;
- switch the machine on and the full column will be
positioned automatically over the dispensing opening;
- fill the empty column;
- release one or more cups with the special button and
replace the cover.
The cup dispenser shelf has a double swivel that improves
acees to the cup dispenser, especially when the machine
is installed in a bank of machines.
Fig. 6
1 - Cover
2 - Coffee hopper
3 - Shutter
Fig. 5
1 - Swivel shelf
2 - Swivel release lever
3 - Shelf positioning magnet
4 - Adjustable stirrer guide
5 - Cover
6 - Cup stacker
7 - Stirrer stacker
8 - Cup release button
LOADING SUGAR AND
INSTANT PRODUCTS
A self-adhesive label indicating the product is attached on
each container.
After lifting their cover, fill the single containers with the
appropriate products, taking care not to compress them to
prevent packing. Make sure the products do not contain any
clots.
SANITISING THE FOODSTUFF
CIRCUITS AND THE MIXERS
When installing the unit, and then at least once a week or
even more frequently according to the use of the machine
and the quality of the inlet water, the mixers and the
dispensing conduits must be thoroughly sanitised (cleaned
and disinfected), to guarantee proper hygiene of the dis-
pensed products.
The parts to be cleaned are as follows:
- powder deposit drawers, mixer and instant drink dispens-
ing conduit;
- tubes and dispensing spouts;
- cup chute;
- dispensing compartment;
- remove the covers, the powder and the water funnels, the
feeders, the powder deposit drawers and the mixer wheels
from the mixers (see Figure 7);