Necta Astro, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 84

© by NECTA VENDING SOLUTIONS SpA
22
0210 206-00
MISCELLANEOUS
FRESH-BREW UNIT DATA
For each of the two Fresh-brew units installed in the
machine, it is possible to set the brewing time, the drying
time for the used dose and whether or not to enable product
whipping and automatic cleaning of the brewing unit.
JUG FACILITIES
Some models, supplied with a special button, permit
dispensing of a number of selections (programmable be-
tween 1 and 9; 5 by default) without cup to fill a jug.
PASSWORD
It is a 5-digit numeric code which is required to access
programming.
The default value of this code is set to 00000.
ENABLING THE PASSWORD
This function is used to enable the option of requesting the
password to access programming; the password request is
disabled by default.
MASKING THE FILLER MENU
This function is used to determine the filler menu options to
be left active or to be disabled.
The reference numbers of the menus do not change even
if some are disabled.
STATISTICS
Data on the machine operations is stored in both general
counters and relative counters, which can be reset without
losing total data.
GENERAL COUNTER
An electronic counter collectively stores all selections
made since the last reset.
DISPLAYING GENERAL DATA
When pressing the confirm button “ ” he stored data is
sequentially displayed at 1 second intervals, and namely:
1 - counter by single selection;
2 - counter by time bands;
3 - discount counter;
4 - failure counter;
5 - coin mechanism data.
RESETTING GENERAL DATA
Statistics can be reset either globally (all types of data) or
partially for:
- selections
- discounts/overprice
- failures
- coin mechanism data
Press the confirm button “ ” and the message “Confirm?”
starts blinking.
Press the confirm button “ ” , the message “Working” is
displayed for a few seconds and all statistics are reset.
DISPLAYING COUNTERS
This function is used to enable/disable the display of the
total number of sales since the last statistic reset, during
the start-up phase of the machine.
PRINT
Connect an RS232 serial printer having a Baud rate of 9600,
8 data bit, no parity, 1 stop bit to the serial port located on
the push button board to print all of the statistics described
in the paragraph “statistics display”. The printout will also
contain the machine code, the date and the software
version.
Statistics can be printed partially or totally.
To connect the printer, do as follows:
- press the confirm print button “ ” , displaying the message
“Confirm?”;
- connect the printer before confirming;
- press the confirm button“ ” again to start printing.
TEST
COMPLETE SELECTION
This function is used to get a complete selection with the
door open without inserting any money.
SPECIAL FUNCTIONS
After accessing this function, it is possible to:
- activate the coffee unit;
- grind and release a coffee dose;
- open a solenoid valve to let air in when eptying the boiler
for maintenance:
-install the boiler manually.