NEC XN120 Vision, Руководство по функциям

Страница: 98 / 222

Features
Features Manual
96
Handsfree and Monitor
n
Description
Handsfree allows a system phone user to process calls using the speaker and microphone in the
telephone (instead of the handset). Handsfree is a convenience for workers who don’t have a free hand
to pick up the handset. For example, a terminal operator could continue to enter data with both hands
while talking on the phone.
The system provides three variations of Handsfree operation:
Handsfree User can place and answer calls by pressing SPK
instead of using the handset.
Automatic Handsfree User can press a line or line appearance key without
first lifting the handset or pressing SPK. An extension
can have Automatic Handsfree for just outgoing calls
or both outgoing calls and incoming line/loop key
calls. Automatic Handsfree can also be used with the
Call Coverage or Park features. Normally, extensions
without speakerphones should have Automatic
Handsfree for outgoing calls only.
Monitor User can place a call without lifting the handset, but
must lift the handset to speak.
Conditions
None
Default Setting
Enabled.
n Programming
Ø
20-06-01 : Class of Service for Extensions
n
Related Features
Ø Central Office Calls, Answering / Central Office Calls, Placing
Ø Handsfree Answerback
Ø
Microphone Cutoff
Ø
Single Line Telephones
Ø
Prime Line Selection
n
Operation
To talk Handsfree:
1. Press SPK, CALL key or line key.
2. Place call.
3. Speak toward phone when called party answers.
To change a handset call into a Handsfree call:
1. Press SPK.
2. Press SPK to hang up.
To change a Handsfree call into a handset call:
1. Lift handset.