XEN Topaz
NEC Business Solutions Ltd
Features and Specifications Manual
Chapter 4 - 51
D
oc. N
o. 8846 -
Release
2.0
Apr
il 2005
Use this option to assign a Toll Restriction Class (1-15) to an extension.
35-05-01: Account Code Setup - Account Code Mode
For each Class of Service (1-15) use this option to select the Account
Code Mode. The options are:
0 Account Codes disabled. (Any codes you enter dial out as part of your
initial call.)
1 Account Codes optional (not required).
2 Account Codes required (forced) but not verifiable.
3 Account Codes required (forced) and verifiable.
35-05-03: Account Code Setup - Account Codes for Incoming Calls
For each Class of Service (1-15), enter 1 in this option to enable
Account Codes for incoming calls. Enter 0 to disable Account Codes for
incoming calls. If disabled, any codes you enter dial out on the con-
nected trunk.
35-05-04: Account Code Setup - Hiding Account Codes
For each Class of Service (1-15), enter 1 to have the system hide
Account Codes on an extension’s display as they are entered. Enter 0 to
have the Account Codes displayed.
35-06-01: Verified Account Code Table
Use this option to enter data into the Verified Account Code Table. You
can enter up to 2000 codes from 3-16 digits in length. For a wild card,
press the FLASH key.
• Related Features
•
Abbreviated Dialling
Abbreviated dialling bins can contain stored Account Codes. Prevent them from
being displayed using 20-07-04.
•
Automatic Route Selection
ARS can force a user to enter an Authorization Code prior to using a certain
route. The system verifies the ARS Authorization Code dialled against the ARS
Authorization Code list (Program 44-03).
•
Programmable Function Keys
To simplify Account Code entry, store the Account Code (e.g., *1234*) in a One-
Touch Key. Just press the key instead of dialling the codes.
•
PBX Compatibility
When using Account Codes, do not use an asterisk within a PBX access code.
Otherwise, after the *, the trunk would stop sending digits to the central office.
•
Station Message Detail Recording
Account Codes appear on the SMDR report (even if they are hidden on the
phone’s display).
• Operation
To enter an Account Code any time while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your sys-
tem has Optional Account Codes enabled. You may also be able to use this procedure for incoming calls.
This procedure is not available at SLTs.
Содержание Xen Topaz
Страница 1: ...NEC Business Solutions Ltd Document No 8802 Release 2 0 April 2005 Features and Specifications Manual ...
Страница 216: ...Chapter 4 208 Features NEC Business Solutions Ltd XEN Topaz Doc No 8846 Release 2 0 April 2005 ...
Страница 390: ...Chapter 4 382 Features NEC Business Solutions Ltd XEN Topaz Doc No 8846 Release 2 0 April 2005 ...