XEN Topaz
NEC Business Solutions Ltd
Features and Specifications Manual
Chapter 4 - 97
D
oc. N
o. 8846 -
Release
2.0
Apr
il 2005
Allow (1) or prevent (0) a user’s Class of Service from automatically
blocking outgoing Caller ID information when a call is placed. If allowed
(i.e., block enabled), the system automatically inserts the Caller ID block
code (defined in Program 14-01-21) before the user Dialled digits (this
requires Program 14-02-10 to be enabled). If prevented (i.e., block dis-
abled), the system outdials the call just as it was Dialled by the user.
20-09-01: Class of Service Options (Incoming Call Service) - Second Call for
DID/DISA/ DIL
In an extension’s Class of Service, enable (1) or disable (0) forced sec-
ond call. When enabled the user can not turn off second call indication
by Service Code 779+0. When disabled the user can choose to receive/
not receive second calls with Service Code 779+1.
20-09-02: Class of Service Options (Incoming Call Service) - Caller ID Display
In an extension’s Class of Service, enable (1) or disable (0) the exten-
sion’s ability to display incoming Caller ID name/number information.
20-09-04: Class of Service (Incoming Call Service) – Notification for Incom-
ing Call List Existence
When enabled, “Check List” appears on a System Phone’s LCD for any
new call received with Caller ID. This indicates that there is new Caller
ID information to view in the Caller ID list. When disabled, this LCD indi-
cation is not provided, although the new Caller ID information can still be
viewed in the Caller ID list.
20-13-06: Class of Service Options (Supplementary Service) Automatic Off-
Hook Signal
In order for a display phone to show Caller ID information for a second
incoming call, must be enabled (1).
20-19-01: System Options for Caller ID - Caller ID Display Formatting
Determine whether the first 10 digits (0) or last 10 digits (1) should be
displayed when Caller ID exceeds 12 digits.
20-19-02: System Options for Caller ID - Caller ID Wait Timer
Determine how long an incoming CO call should wait for Caller ID infor-
mation from telco before the system connects the call.
20-19-03: System Options for Caller ID - Edit Caller ID
In an extension’s Class of Service, enable (1) or disable (0) the exten-
sion’s ability to edit the stored Caller ID information. For ISDN incoming
calls, the digits assigned in Program 10-02-03 are prefixed to the Caller
ID number (default = 0) when Program 20-19-03 is enabled.
80-02-01: DTMF Tone Setup – Duration
80-02-02: DTMF Tone Setup – Pause
With Program 14-01-20 set to 1 and Program 14-02-10 set to 1, if the
Caller ID block code is being sent too quickly for the telco to recognize,
lengthen the pause and duration time for the DTMFs.
• Related Features
•
Automatic Route Selection
Содержание Xen Topaz
Страница 1: ...NEC Business Solutions Ltd Document No 8802 Release 2 0 April 2005 Features and Specifications Manual ...
Страница 216: ...Chapter 4 208 Features NEC Business Solutions Ltd XEN Topaz Doc No 8846 Release 2 0 April 2005 ...
Страница 390: ...Chapter 4 382 Features NEC Business Solutions Ltd XEN Topaz Doc No 8846 Release 2 0 April 2005 ...