NEC Xen Topaz Скачать руководство пользователя страница 237

Страница: 237 / 390

XEN Topaz

NEC Business Solutions Ltd

Features and Specifications Manual

Chapter 4 - 229

oc. N

o. 8846 -

Release

2.0

Apr

il 2005

The MSG key at system phone can also be set as the Voice Mail Message key.

• Operation

To leave a Message Waiting:

1. Call busy or unanswered extension.

2. Press Message Waiting key (PGM 15-07 or SC 851: 38)

3. Hang up.

With system phones, the MW LED lights.

To answer a Message Waiting:

When you have a message, your MW LED flashes fast for System Phones.

1. At a system phone, press a SPK key and dial 841.

OR
Press Message Waiting key (PGM 15-07 or SC 851: 38).
OR
At single line telephones, lift the handset and dial 841.

If the called extension doesn’t answer, dial 0 or press your Message Waiting key to automatically leave

them a message.
Normally, your MW LED goes out. If it continues to flash, you have new messages in your “Voice Mail” mail-

box or a new “General Message”. Go to “To check your messages” below.

To cancel all your Messages Waiting:

This includes messages you have left for other extensions and messages other extension have left for you.

1. At system phone, press a SPK key.

OR
At single line telephone, lift handset.

2. Dial 873.

3. Hang up.

To cancel the Messages Waiting you have left at a specific extension:

1. At system phone, press a SPK key.

OR
At single line telephone, lift handset.

2. Dial 871.

3. Dial number of extension you don’t want to have your messages.

4. Hang up.

To check your messages:

1. Press CHECK

2. Dial 841.

You can have any combination of the message types in the table below on your phone.

Содержание Xen Topaz







































































































































































































































































































































































































Результаты поиска

Содержание Xen Topaz

Отзывы:

Похожие инструкции для Xen Topaz

Бренды по названию

Популярные бренды

NEC Xen Topaz, Руководство по функциям и спецификациям

Результаты поиска

Содержание Xen Topaz

Отзывы:

Похожие инструкции для Xen Topaz

Бренды по названию

Популярные бренды