XEN Topaz
NEC Business Solutions Ltd
Features and Specifications Manual
Chapter 4 - 335
D
oc. N
o. 8846 -
Release
2.0
Apr
il 2005
Trunk to Trunk Transfer
• Description
Trunk to trunk transfer refers to the connection of any two trunk ports together.
•
Hold and Transfer.
An extension user places one trunk call on hold and then either makes an
outgoing call, answers an incoming call or retrieves a call from hold and
transfers the two trunk calls together.
•
Withdraw from Conference.
An extension user sets up a conference call with two (or more) trunk calls
and then withdraws from the conference, leaving the trunk callers con-
nected.
•
Extension User sets Call Forward Off Premise.
An incoming trunk call is routed to an extension with call forward off
premise. The user can set call forward off premise by setting call forward to
an Abbreviated Dial bin or by Service Code 713+6+Trunk Access Code+off
premise number.
•
A Trunk is routed directly Off Premise.
The Topaz is configured to route the incoming DDI trunk directly to an off
premise number. This is set in Program 22-11-02 by entering the trunk
access code followed by the off premise extension number as the target for
the DDI number e.g. 901509643111.
Conditions
A. Two outgoing analogue trunks can not be connected together, this is because a
disconnect clear signal is not generated by the PSTN for calls originated by the
PBX.
B. The following tables show the settings required to allow the various trunk to trunk
options.
For each call type the programming required is listed, use the key below for each
Program number.
A - Program 14-01-13 Trunk to Trunk Transfer
B - Program 14-02-12 Network Disconnect Clear Signal for Analogue trunks
Two trunks call to be transferred
Required Settings
Trunk Call Type
Trunk Call
Incoming Analogue
Incoming Analogue
A and B
Outgoing Analogue
A and B
Outgoing ISDN
A
Outgoing Analogue
Outgoing Analogue
Not available
Outgoing ISDN
A
ISDN
Any trunk call type
A
Содержание Xen Topaz
Страница 1: ...NEC Business Solutions Ltd Document No 8802 Release 2 0 April 2005 Features and Specifications Manual ...
Страница 216: ...Chapter 4 208 Features NEC Business Solutions Ltd XEN Topaz Doc No 8846 Release 2 0 April 2005 ...
Страница 390: ...Chapter 4 382 Features NEC Business Solutions Ltd XEN Topaz Doc No 8846 Release 2 0 April 2005 ...