Xen IPK Xen Mail CTI Installation Guide
Setting Up TeLANophy
Chapter 6 - 83
D
oc. N
o. 8557 -
Release
1.1
June 20
04
S
ECTION
13
I
NSTALLING
T
E
LAN
OPHY
FROM
A
NETWORK
To install TeLANophy applications on individual workstations from a
network, perform the following procedures.
Because you must have network rights to create directories, copy files, and
grant directory rights to other workstations, the network administrator may
need to perform the “To copy TeLANophy installation files to a network
directory” procedure for you.
To copy TeLANophy installation files to a network directory
1 Log on to the network.
2 On a network drive accessible to all workstations, create an installation
directory for the applications. For example, for ViewMail, type
md x:\viewapps\viewmail
and press Enter.
3 Insert the voice messaging system’s disc in the CD-ROM drive. For
each TeLANophy application you want to install, copy the subdirectory
from the disc to the installation directory that you created in step 2.
To install TeLANophy from a network
1 Choose “Start,” and then “Run.”
2 Refer to the table on page 81 for the TeLANophy application path. Type:
<your network TeLANophy application path>\setup
and choose “OK.”
For example, for ViewMail, type
x:\viewapps\viewmail\full\setup
Warning! ViewMail and ViewFax must be installed in the same directory (the default). If
ViewMail is already installed,
do not
install ViewCall Plus in the same directory, or
both programs may not work properly.
3 Perform one of the following actions:
• If you are installing ViewCall Plus, in the Welcome dialogue box, choose
“Next.”
• If you are not installing ViewCall Plus, go to step 6.
4 In the Information dialogue box, choose “OK.”
5 In the Install Options dialogue box, select “Local installation.”
6 Follow the on-screen instructions to complete the installation.
