Condition du voyant
Condition du projecteur
Remarque
Condition du voyant
Condition du projecteur
Remarque
Cette section facilite la résolution des problèmes pouvant être rencontrés pendant l’installation ou l’utilisation du
projecteur.
Voyant d’alimentation (POWER)
Condition du voyant
Condition du projecteur
Remarque
Eteint
0,5 sec ON,
0,5 sec OFF
2,5 sec ON,
0,5 sec OFF
0,5 sec ON,
0,5 sec OFF
L’alimentation principale est
coupée.
Le projecteur est prêt à s’allumer.
Le projecteur est en mode Minut.
mise en veille.
Le projecteur est en cours de
refroidissement.
Le projecteur est allumé.
Le projecteur est en mode ralenti
ou en mode veille.
Vert
Orange
–
Attendre un instant.
–
Attendre un instant.
–
–
Eteint
Normal
Erreur du couvercle de la lampe
Erreur du couvercle du miroir
Erreur de température
Erreur de température due à la
poussière
Erreur d’alimentation
Erreur du ventilateur
Erreur de la lampe
Ré-allumage de la lampe
Touche de commande verrouillée
Une main ou un objet bloque le
faisceau de lumière.
Mode ralenti
–
Remettre le couvercle de la lampe
correctement.
S’assurer que le couvercle du
miroir est ouvert. Le projecteur ne
peut pas être mis en marche si le
couvercle du miroir est fermé.
Le projecteur est en surchauffe.
Déplacer le projecteur vers un
endroit plus frais.
Retirer la lumière présente dans le
faisceau de lumière.
L’alimentation de puissance ne
fonctionnera pas correctement.
Les ventilateurs ne fonctionnement
pas correctement.
La lampe ne s'allume pas. Attendre
une bonne minute et ensuite
rallumer le projecteur.
Le projecteur est ré-allumé.
La touche du panneau de commande
a été enfoncée lorsque le verrouillage
de la touche de commande est activé.
Le retirer du faisceau de lumière.
–
Voyant d’état (STATUS)
Voyant clignotant
Voyant stationnaire
Clignote en vert
Clignote en orange
Voyant clignotant
Voyant stationnaire
Clignote en rouge
Clignote en vert
Orange
Rouge
Vert
1 cycle (0,5 sec ON,
2,5 sec OFF)
2 cycle (0,5 sec ON,
0,5 sec OFF)
3 cycle (0,5 sec ON,
0,5 sec OFF)
4 cycle (0,5 sec ON,
0,5 sec OFF)
6 cycle (0,5 sec ON,
0,5 sec OFF)
Eteint
Normal
La lampe a atteint la fin de sa durée de vie. Le message de
remplacement de la lampe s’affiche.
La lampe a été utilisée au-delà de ses limites. Le projecteur
ne s’allumera pas avant le remplacement de la lampe.
Le mode de la lampe est réglé sur le mode Eco.
Rouge
Rouge
Vert
–
Remplacer la lampe.
Remplacer la lampe.
–
Voyant de la lampe (LAMP)
Voyant clignotant
Voyant stationnaire
8. Depistage des pannes
F-13