G-10
[Symptom 2]
Bei Trapezverzerrungen (wie abgebildet) ist entweder der
Bildschirm oder der Projektor leicht nach unten geneigt.
[Abhilfe]
Neigen Sie das untere Ende des Bildschirms nach vorne oder
drehen Sie den hinteren Fuß (Bildschirmseite) am Projektor,
um die Trapezverzerrung zu korrigieren.
[Symptom 3]
Wenn, wie in der rechten unteren Abbildung gezeigt, die linke
Kante des Bildes vertikal verbreitert ist, ist entweder der
Projektor nicht gerade nach vorne auf den Bildschirm gerichtet
oder der Projektor ist leicht nach links geneigt. Wenn umgekehrt
die rechte Kante des Bildes vertikal verbreitert ist, ist entweder
der Projektor nicht gerade nach vorne auf den Bildschirm
gerichtet oder der Projektor ist leicht nach rechts geneigt.
[Abhilfe]
Stellen Sie den Projektor gerade vor dem Bildschirm auf.
Vergewissern Sie sich, dass der Bildschirm und der Projektor
parallel zu einander sind.
PC CARD
AUDIO IN
L
/MONO
R
VIDEO IN
S-VIDEO IN
DVI-I IN
RGB IN
RGB OUT
DVI-I
RGB
AUDIO IN
USB
AUDIO OUT
PC
CONTROL
REMOTE
IN
POWER
ENTEER
MENU
SOURCE
FOCUS
PC CARD
CANCEL
STATUS
LAMP
ON/
STAND BY
AUTO
ADJUST
3D
REFORM
SELECT
Nach oben
Nach unten