OptoLink A-CCP to OptoLink A-FCR, BCR or CCR receptacle
Step 1: Inspect the connector face and O-rings
Grease the O-rings with Molykote 111
Step 2: Inspect the connector surface. If the connector surface is
dirty, follow the OptoLink maintenance instructions overleaf
Step 3: Visually align the key way on the CCP connector with the
key pin tip on the receptacle
before
mating (illustration A)
Do not twist the connector to align it during mating
Step 4: Push to mate the connector (illustration B)
Step 5: Whilst turning the locking sleeve (illustration C)
Note: The connector must be hand tightened
Assembly
OptoLink Handling instructions
Follow these instructions carefully to ensure correct use of your
OptoLink connector and penetrator harnesses.
B
C
A
