NEC WL1700-MS, Руководство по установке

Страница: 125 / 226

Data Assignment
Chapter 4
INITIAL SETUP 91
Type set interface {VLAN ID:1–4093} ip {IP Address} {Subnetmask} to
assign IP addresses to Interfaces on the Controller.
The following is an example when vlan ID ( 2 ), IP address ( 192.168.20.10 ),
and Subnet mask ( 255.255.255.0 ) are specified in the command.
19
Specify the Remote Authentication Dial In User Service (RADIUS) Server.
To specify a name, type set radius server {RADIUS Server Name: Up to 64
characters with no space can be specified} .
The following is an example when RADIUS Server Name ( RADIUS1 ),
RADIUS’s IP address ( 192.168.10.100 ), and a password ( pon ) are specified
in the command.
To add servers into a group, type set server group {Server Group Name:Up to
32 characters with no space can be specified} members {Server Name 1}
[Server Name 2] [Server Name 3] [Server Name 4] .
The following is an example when RADIUS Server Name ( RADIUS1 ) is
added into a Server Group ( HOGE ) in the command.
Type set authentication dot1x ssid {ESSID} {User Name} pass-through
{Server Group Name}
The following is an example when each ESSID ( B1/B2/B3 ) is added into a
Server Group ( HOGE ) and all the users ( ** ) are allowed in the command.
WL111111# set interface 2 ip 192.168.20.10 255.255.255.0
Basic Settings
WL111111# set radius server RADIUS1 address 192.168.10.100 key pon
WL111111# set server group HOGE members RADIUS1
WL111111# set authentication dot1x ssid B1 ** pass-through HOGE
WL111111# set authentication dot1x ssid B2 ** pass-through HOGE
WL111111# set authentication dot1x ssid B3 ** pass-through HOGE