background image

Preface   vii

Preface

This service and reference manual contains the technical information necessary to set up and
maintain the NEC Versa

®  

VXi notebook computer.

The manual also provides hardware and interface information for users who need an overview of
the system design. The manual is written for NEC Computers-trained customer engineers,
system analysts, service center personnel, and dealers.

The manual is organized as follows:

Chapter 1

, System Overview, provides an overview of the hardware and interface components.

Chapter 2

,

 

System Configuration and Setup, provides information on setup and

 

how to

 

operate

the notebook.

Chapter 3

,

 

Disassembly and Reassembly,

 

provides

 

detailed instructions on how to disassemble

the notebook.

Chapter 4

,

 

System Board Layout,

 

shows the system boards and the board connectors.

Chapter 5

, Illustrated Parts Breakdown,

 

shows the Illustrated Parts Breakdown (IPB) and lists

field replaceable units (FRUs).

Chapter 6

, Preventive Maintenance, lists general notebook preventive maintenance procedures.

Chapter 7

, Troubleshooting,

 

lists troubleshooting procedures as well as helpful servicing hints.

Chapter 8

, Getting Services and Support,

 

provides information on how to contact NEC

Computers for service information and technical support.

Chapter 9

, Specifications,

 

lists

 

physical specifications, memory map, and interrupt controllers.

Glossary

 and an 

Index

 are included for convenience.

Содержание VERSA VXi




























































































































Отзывы: