NEC VERSA VXi, Инструкция по обслуживанию и справочник

Страница: 20 / 123

System Overview 1-11
!
PC Card Slots — Two PC card slots allow insertion of two Type II PC cards or one Type III
PC card in the bottom slot. Card BUS cards are supported and Zoom Video is supported in
the top slot.
!
TV Out — Allows you to connect to a television.
Around the Bottom of the System
The bottom of the NEC Versa VXi offers the following features. The features are described after
the figure.
Bottom features
A – Battery Bay D – Memory Module Bay Cover
B – Battery Release Latch E – Tilt Foot
C – PCI LAN/Modem Card Bay Cover
!
Battery Bay — Equipped with a rechargeable Nickel-Metal-Hydride (NiMH) or (depending
on the model) Lithium-Ion (Li-Ion) battery.
!
Battery Release Latch — Slide the latch to the other end and hold it. While holding the
latch, slide the battery bay outwards to remove the battery.
!
Memory Module Bay Cover — Remove the screw to access two SO-DIMM slots. One slot
has a SDRAM memory board configured by the factory. The other is empty for upgrade
use.
!
PCI LAN/Modem Card Bay Cover — Remove the screw to access the 56K fax/data
modem, mini-PCI LAN, or combination mini-PCI LAN/modem.
!
Tilt Foot — Adjust to provide flexible keyboard angle.
Around the Port Replicator
The NEC Port Replicator is an accessory that duplicates some of the ports found on the back of
the NEC Versa VXi system. It also has a LAN port for a network connection and a Kensington
lock. The lock secures the NEC Versa VXi to the Port Replicator and secures the Port Replicator
to the desk. The user can keep the NEC Port Replicator in the office and connected to
peripherals while taking the NEC Versa VXi on the road.